1. Allowable speed: In an environment with proper installation and good lubrication, the allowable bearing speed limit is 0.2-0.5 times. Generally, 0.2 times the speed limit is more appropriate.
2. Application parts: Tapered roller bearings are mainly used to bear the axial and radial coordinated load, which is mainly the axial load. It is usually applied by two bearings, the front, rear, left, and right rims, bevel gears, and splitters of the car. Transmission system parts such as gearbox and reducer.
3. Allowable elevation angle: Wanda slewing bearing introduces, bearings generally do not allow skew in the shaft-relative housing hole, if there is skew, it should not exceed 2'.
4. Allowable temperature: The slewing bearing bears normal loads, and the lubricating fluid has heat-resistant properties. When the lubrication is good, the bearing is allowed to work at a working temperature of -30℃-150℃.
Next：Application range of slewing ring
The intrusion of dust and impurities in mechanical operations is inevitable. As a bearing used in lar…
Compared with ordinary bearings, slewing bearings have the same working principle, basically the same…